2003 Audi RS6 Paint Correction & Coating

The owner of this vehicle recently purchased it after it sat outside for 4 years with infrequent use and even less frequent cleaning.  Audi paint of this vintage is well known for hard clearcoat and this was no exception.  Add the years of neglect and the brilliant black paint that shows everything and this car is a tall order.  It also was exhibiting a common issue from this vintage where old factory tape mark appear years later having altered the paint texture deep into the finish, this is a very deep defect and require some patience, skill and knowing when to yield.

Process

  • Wheels and tires cleaned with Meguairs D140 and Meguiars D108
  • Prefoamed with Angelwax Fast Foam
  • Hand wash with Carpro Reset
  • Mechanically decontaminated with clay mitt and Reset
  • Compounded with the following combos: Rotary and wool with meguiars M100, Boss 21 with Boss fast MF pads and fast correcting cream, Flex kompakt with wool and M100
  • Tape marks were thinned with the flex kompakt, denim pads and meguiars M100
  • Polished with the following combos: Boss21 with Rupes yellow and Menzerna final polish, Adams swirl killer mini, rupes yellow and menzerna final finish, flex kompakt, flex black pad and menzerna final finish
  • Body Prep wipe down was performed with Prep-Sol
  • Paint was protected Gtechniq EXO
  • Tires were dressed with carpro PERL
  • Wheels were protected with carpro hydro2
  • Exhaust was polished with Pinnacle Exhaust cleaner and brightener
  • Trim was protected with Ultima Tire & Trim Guard
  • Engine with clean with Zep Citrus via Tornador black
  • Carbon Fiber covers were corrected with the Rupes Nano
  • Engine Protected with 303AP